Solid Valve manufactures ductile iron gate valves for Kenya's water utilities, county infrastructure projects, irrigation schemes and industrial pipelines, built to DIN 3352, BS5163 and AWWA C509/C515 — the standards most commonly referenced in Kenyan tender specifications. Factory-direct pricing. Every valve hydraulically and pneumatically tested before shipment.
Flanged End Gate Valve — the most common configuration for Kenyan municipal water mains and industrial pipelines. Built to DIN 3352-F4/F5, BS5163 and AWWA C509/C515, with flange drilling to DIN2501, BS4504 or ANSI B16.1, so it bolts directly into whichever piping standard your project already specifies.
Socket-end Resilient Seated Gate Valve — same DIN 3352-F4/F5, BS5163 and AWWA C509/C515 standard coverage, in a socket-end format for direct pipe bonding on smaller-diameter distribution lines.
Spigot End Gate Valve — built to DIN3352, BS5163 and SABS 664/665, PN10/PN16, with socket ends to ISO4422 and factory testing to ISO5208. The SABS reference is worth noting specifically for Kenyan and wider East/Southern African buyers, since SABS-aligned specs appear frequently in regional tenders.
Ductile Iron Knife Gate Valve — for slurry, sludge and wastewater lines where a standard gate valve cavity would clog; a common spec on sewage and wastewater treatment projects.
All four gate valve types are cast from ductile iron (GGG50), fitted with EPDM or NBR resilient seating, and every unit is hydraulically and pneumatically tested before shipment — not just spot-checked batches.
Kenyan water tenders — whether issued by a county water board or a private EPC contractor — almost always reference DIN, BS or AWWA directly rather than a Kenya-specific valve standard, so a ductile iron gate valve built to DIN 3352 or BS5163 already meets the technical specification most projects ask for. Where it gets harder is customs: importing valves into Kenya generally means going through PVoC (Pre-export Verification of Conformity) with a KEBS-appointed agent such as SGS, Intertek or Bureau Veritas to obtain a Certificate of Conformity, then applying for the Import Standardization Mark at the port of entry. We provide the material certificates and hydraulic/pneumatic test reports that PVoC inspectors require, so that step doesn't stall your shipment.
Standard-size ductile iron gate valves (DN50–DN300) typically ship with MOQs as low as 1–3 pieces per size, with larger-bore or fully customized valves usually requiring 5–10 pieces to justify a production run. Production lead time for standard orders generally runs 20–30 days, plus 15–30 days by sea to Mombasa. Samples for DN50–DN100 sizes are usually available within 7–14 days.
Buyers sourcing a ductile iron gate valve for Kenya often also serve the wider East African Community — Uganda, Tanzania, Rwanda — from the same Mombasa-port shipment, so we can consolidate multiple valve types and sizes into one container to reduce per-unit freight cost.
Custom branding, packaging and drawing-based OEM/ODM is available on every gate valve type listed above — useful for distributors and EPC contractors who need their own labeling on delivered stock.
Do you ship ductile iron gate valves directly to Kenya?
Yes — we regularly export to East Africa, typically by sea to the Port of Mombasa.
Which standard should I specify for a Kenyan water project — DIN, BS or AWWA?
All three are manufactured in-house. Tell us which standard your project specification references and we'll match the right gate valve configuration.
Can you supply documentation for KEBS/PVoC clearance?
Yes — material certificates and hydraulic/pneumatic test reports are provided as standard, ahead of PVoC inspection.
What's the minimum order for a ductile iron gate valve for Kenya?
Standard sizes ship from as low as 1–3 pieces; larger or custom-configured valves typically start at 5–10 pieces.
Can the valve be customized with our logo or drawings?
Yes, OEM/ODM is available — custom logo, packaging and drawing-based manufacturing.
English
