Home > Products > ;Ductile Iron Valve > ;Gate Valve
Gate Valve
SOLID is a ductile iron gate valve manufacturer and exporter supplying resilient seated and metal seated gate valves for municipal water supply, wastewater treatment, irrigation, fire protection, pumping stations, and industrial pipeline isolation. Our range covers DN40-DN1200 in PN10, PN16, and PN25, built to BS5163, DIN 3352 (F4/F5), EN 1074, AWWA C509, and AWWA C515.
We supply standard catalogue valves and project-specific production based on valve schedules, drawings, technical specifications, materials, connection standards, and operating requirements.
| Item | Specification |
|---|---|
| Size | DN40-DN1200 (approx. 1½"-48") |
| Pressure Rating | PN10 / PN16 / PN25 |
| Standards | BS5163 / DIN 3352 F4, F5 / EN 1074 / AWWA C509 / AWWA C515 |
| Seat | EPDM / NBR resilient seat or metal seat |
| Stem Type | Non-rising stem (NRS) or rising stem (OS&Y) |
| Coating | Fusion-bonded epoxy coating, ≥250 μm |
| MOQ | No fixed MOQ; 1 pc trial order and replacement orders accepted |
| Certificates | ISO, CE, BSI, WRAS-related certificates |
SOLID manufactures gate valves in different sizes, pressure ratings, seat materials, stem structures, connection types, and operating configurations, so buyers can match the valve to the existing pipeline and project specification instead of selecting by nominal diameter alone.
| Specification | Available Range |
|---|---|
| Size | DN40-DN1200 / approximately 1½"-48" |
| Pressure Rating | PN10 / PN16 / PN25 |
| Valve Design | Resilient Seated / Metal Seated / Knife Gate Valve |
| Stem Design | Non-Rising Stem (NRS) / Rising Stem (OS&Y) |
| Design Standards | DIN 3352 / BS5163 / EN 1171 / EN 1074 / AWWA C509 / AWWA C515 |
| Face-to-Face | DIN 3202 F4/F5 / EN 558 / BS5163 / ASME B16.10 according to design |
| Flange Standards | EN 1092-2 / DIN 2501 / BS4504 / ANSI-ASME configurations |
| Body & Bonnet | GGG40 / GGG50 / EN-GJS grades / ASTM A536 equivalent ductile iron grades |
| Wedge | Ductile Iron + EPDM / NBR / Metal Seated |
| Stem | 2Cr13 / SS420 / SS304 / SS316 |
| Stem Nut | Brass / Bronze |
| Bolting | Zinc-Plated Carbon Steel / SS304 / SS316 |
| Seat Material | EPDM / NBR / Metal Seat |
| Coating | Fusion-Bonded Epoxy, standard thickness ≥250 μm; project-specific coating available |
| Connection | Flanged / Socket End / Spigot End / Project-Specific Connection |
| Operation | Handwheel / Stem Cap / Gearbox / Electric Actuator |
| Typical Media | Potable Water / Raw Water / Wastewater / Irrigation Water / Industrial Water |
| Standard | Typical Markets | Face-to-Face | Flange Drilling | Rating | Test Reference |
|---|---|---|---|---|---|
| DIN 3352 F4 / F5 | Europe, Middle East, Africa, Asia | DIN 3202 F4 (short) / F5 (long) | EN 1092-2 / DIN 2501 | PN10 / PN16 / PN25 | EN 12266-1 |
| BS5163 | UK-influenced markets, Africa, Middle East, Asia-Pacific | BS5163 / EN 558 | EN 1092-2 / BS4504 | PN10 / PN16 / PN25 | BS5163 / EN 12266-1 |
| AWWA C509 (resilient seated) | North America, Latin America, waterworks projects | AWWA / ASME B16.10 as specified | ANSI / ASME configurations | psi-rated (confirm per size) | AWWA C509 |
| AWWA C515 (ductile iron, resilient wedge) | North America, Latin America, waterworks projects | AWWA / ASME B16.10 as specified | ANSI / ASME configurations | psi-rated (confirm per size) | AWWA C515 |
Different water networks and industrial pipelines require different connection methods and valve structures. SOLID supplies several ductile iron gate valve configurations for distribution, infrastructure, and project procurement.
Flanged gate valves are widely used in municipal water networks, treatment plants, pump stations, and industrial pipelines. The flanged connection allows removal, maintenance, and replacement without cutting the pipeline. SOLID manufactures flanged gate valves to DIN, BS, EN, and AWWA requirements with different pressure ratings and stem configurations.
Socket-end gate valves suit compatible ductile iron pipe systems where the project needs fast installation and fewer flange joints. They are commonly used in buried municipal networks, irrigation systems, and water distribution pipelines.
Spigot end gate valves are designed for pipeline systems using compatible push-in or mechanical joint arrangements. They offer an alternative to double-flanged installation in municipal and water infrastructure projects.
For wastewater, sludge, slurry, or liquids with suspended solids, a knife gate valve may suit better than a conventional resilient seated gate valve. The blade design helps isolate media where fibres or solids could interfere with a traditional wedge.
Seat design is one of the most important factors when buying a ductile iron gate valve. Consider the medium, leakage requirement, operating temperature, and project standard first.
| Selection | Resilient Seated Gate Valve | Metal Seated Gate Valve |
|---|---|---|
| Typical Media | Clean water, potable water, wastewater | Water and project-specific service |
| Sealing | EPDM/NBR encapsulated wedge | Metal-to-metal sealing |
| Shut-Off Performance | Tight shut-off for water applications | Suitable where metal seating is specified |
| Typical Applications | Municipal water, irrigation, treatment plants | Legacy specifications and special projects |
Most modern municipal water systems specify resilient seated gate valves, because the rubber-encapsulated wedge gives tight sealing and reduces deposit build-up around the seating area.
The stem stays within the valve while the gate moves internally, which suits installations with limited vertical space.
Suitable for underground pipelines
Common in municipal water distribution
Operated through a stem cap or valve box
Requires less vertical installation space
The stem rises as the valve opens, giving a visible indication of valve position.
Suitable for above-ground installation
Visible open/closed indication
Suitable for industrial and selected fire protection systems
Available where OS&Y configuration is required
DIN gate valve buyers frequently need to choose between F4 and F5. F4 is the shorter face-to-face pattern, used where space is limited or the pipeline was designed around a short-pattern valve. F5 is the longer pattern, used where the layout or existing installation requires it.
| DN | F4 Face-to-Face (mm) | F5 Face-to-Face (mm) |
|---|---|---|
| DN50 | 178 | 250 |
| DN65 | 190 | 270 |
| DN80 | 203 | 280 |
| DN100 | 229 | 300 |
| DN125 | 254 | 325 |
| DN150 | 267 | 350 |
| DN200 | 292 | 400 |
| DN250 | 330 | 450 |
| DN300 | 356 | 500 |
SOLID manufactures ductile iron gate valves to DIN and EN configurations including DIN 3352 F4 and F5, DIN 3202 / EN 558 face-to-face requirements, EN 1092-2 / DIN flange drilling, and PN10 / PN16 / PN25. These configurations are widely used in European, Middle Eastern, African, and Asian water infrastructure projects.
BS5163 ductile iron gate valves suit municipal water supply, pumping stations, treatment facilities, and buried distribution systems. Available options:
DN40-DN1200 project range
PN10 / PN16 / PN25
EPDM / NBR resilient seat
Rising or non-rising stem
Handwheel / stem cap / gearbox / actuator
BS and EN flange configurations
SOLID manufactures resilient seated ductile iron gate valves to AWWA C509 and AWWA C515 for waterworks and infrastructure projects:
NRS resilient seated gate valve
OS&Y rising stem gate valve
EPDM encapsulated wedge
Stainless steel stem
Flanged connection
Operating nut, handwheel, gear operation, or electric actuation
A common range for municipal water, building services, irrigation, and distribution networks. PN10, PN16, and PN25 configurations are available depending on the standard and structure.
Frequently used for transmission mains, pumping stations, water treatment plants, and larger distribution pipelines. Gear operators are recommended where manual operating torque becomes high.
Large-diameter ductile iron gate valves for major water transmission pipelines and infrastructure projects. Typical options:
Gearbox operation
Electric actuator
Non-rising stem structure
Special flange drilling
Customized stem and bolting materials
Project-specific coating systems
For large-diameter valves, confirm pressure rating, operating torque, flange standard, and actuator sizing together.
Installed at pipeline branches, distribution sections, and maintenance isolation points. Resilient seated NRS valves with EPDM and FBE coating are widely used here.
Used on raw water lines, treated water pipelines, pump isolation lines, and distribution headers. Pay particular attention to pressure rating, coating, stem materials, and actuator requirements.
Resilient seated gate valves suit many wastewater isolation duties. Where the medium carries a high concentration of sludge, fibres, or suspended solids, a knife gate valve may be more suitable.
Full-bore isolation and low pressure loss when fully open make gate valves suitable for agricultural irrigation and large water distribution systems.
OS&Y rising stem gate valves give visible open/closed indication and are selected for fire protection lines where the project specification requires it.
Large-diameter gear-operated or actuated gate valves isolate pumps, reservoirs, and transmission mains. DN700-DN1200 projects should include operating torque and actuator requirements in the RFQ.
SOLID provides ISO, CE, BSI, and WRAS-related certificates. Certification may apply only to particular models, sizes, materials, or configurations, so specify the exact approval you need. View SOLID certificates.
Project documentation can include:
Product datasheet
General arrangement and dimensional drawings
Material certificate
Pressure test report
Inspection report
Certificate of conformity
Coating information
Installation and operation documentation
SOLID supports OEM and project-specific gate valve manufacturing according to customer drawings, samples, valve schedules, and technical specifications. Customization options:
Valve size and face-to-face dimension
Flange drilling
Body, stem, and seat material
Bolting
Coating thickness and colour
Handwheel or operating nut, gear operator, electric actuator interface
Casting marking, nameplate, customer logo
Private-label packaging
Suitable for valve distributors, EPC contractors, waterworks companies, and customers developing private-label valve ranges.
Yes. AWWA C509 and C515 resilient seated gate valves are available for waterworks and infrastructure projects.
Yes, in different sizes, pressure ratings, stem structures, seat materials, and operating methods.
Yes. DIN F4 and F5 configurations are available according to project specifications and pipeline dimensions.
Ductile iron has nodular graphite, giving higher strength and impact resistance than grey cast iron. It is preferred for buried, higher-pressure, and large-diameter waterworks valves.
EPDM is commonly used for potable and general water; NBR resists oil-containing media better. Choose according to medium composition and operating temperature.
Yes. Non-rising stem valves are common in buried water pipelines; rising stem valves give visible position indication for above-ground use.
Yes. Gearbox and electric actuator configurations are available for large-diameter valves and automated systems.
A PN16 valve is typically shell tested at approximately 24 bar and seat tested at approximately 17.6 bar.
Yes. Standard thickness is at least 250 μm; thickness, colour, testing, and surface preparation can be specified per project.
Standard 12 months. Project-specific warranty requirements can be discussed during contract review.
Yes. SOLID supports customized manufacturing based on drawings, samples, technical specifications, valve schedules, materials, and dimensions.
Sourcing ductile iron gate valves for waterworks, distribution, EPC, irrigation, wastewater, or infrastructure projects? Send SOLID your valve schedule, technical specification, or product list for review. For a faster quotation, include:
Standard + DN/NPS + Pressure + Connection + Face-to-Face + Seat + Stem + Operation + Quantity + Required Certificates
Ductile iron valves can be customized according to customer needs.
Customized ductile iron valves can be designed and manufactured according to specific dimensions, shapes, materials, and process requirements.
Customers can provide their own design drawings or requirement specifications, or communicate with suppliers to customize ductile iron valves that meet specific requirements. Customized ductile iron valves can meet the special needs of different engineering projects, improve the adaptability and reliability of the project.
Get In Touch
Please leave your request for any product you wish. We will be happy to search it for you in our databases or offer its custom synthesis.